Abstract

Construction of mechanically stabilized earth (MSE) walls in multi-tiered configurations is a promising solution for increasing the height of such walls. The good performance of this type of walls after recent major earthquakes was reported in a number of technical studies. In the present study, an experimental approach was adopted to compare the seismic performance of single-tiered and multi-tiered MSE walls using physical modeling and through conducting a series of uniaxial shaking table tests. To do so, several geogrid-reinforced soil walls with wrap-around facing (i.e., three-, two-, and single-tiered) with a total height of 10 m were designed in the form of prototypes of 1-m-height wall models. The step-wise intensified sinusoidal waves were applied to the models in 14 typical forms. Comparing the shaking table test results confirmed the post-earthquake advantages of multi-tiered MSE walls. The results revealed that tiered walls exhibited better behaviors under earthquake loading in terms of the seismic stability of the wall, displacement of the wall crest, horizontal displacement of the wall facing, deformation mode and failure mechanism of the wall, settlement of backfill surface, and seismic acceleration responses.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.