Abstract
The Machining of titanium alloys is challenging because of their high strength, low thermal conductivity, high chemical reactivity, and high stresses at the cutting tool edges. Laser-assisted machining is an effective way to improve the machinability of titanium alloys. This paper presents an experimental investigation of the machinability of cutting force and surface roughness in laser-assisted end milling of titanium alloy Ti-6Al-4V. The absorptivity of Ti-6Al-4V was determined by conducting preheating experiments using a high-power diode laser with a wavelength of 940–980 nm. A thermal analysis was performed using the finite element method to predict temperature distribution. The depth of cut was determined where tensile strength decreased sharply, and the predicted surface temperature is presented in the analysis results. The experiments were performed with conventional machining and laser-assisted machining. Surface roughness, tool wear, and cutting force were evaluated. In contrast to the results of conventional end milling, laser-assisted end milling improved surface roughness. Moreover, laser-assisted end milling proved more effective than conventional end milling in terms of cutting tool damage. Our results proved that heat assistance significantly influenced the magnitude of the cutting forces—while the actual reduction in forces varied slightly depending on the force component, cutting tool, and cutting conditions, force components showed a reduction of roughly 13–46%.
Highlights
The laser-assisted machining process is a type of thermally enhanced process in which a material is locally heated by a laser beam in front of a cutting tool during machining [1].The strength of the material can be reduced by the heat from the laser beam
The experiments were performed with conventional machining and laser-assisted machining
Laser-assisted end milling proved more effective than conventional end milling in terms of cutting tool damage
Summary
The laser-assisted machining process is a type of thermally enhanced process in which a material is locally heated by a laser beam in front of a cutting tool during machining [1].The strength of the material can be reduced by the heat from the laser beam. Hard-to-cut materials, such as titanium and nickel-based superalloys, have superior characteristics, including heat resistance, durability, wear resistance, and corrosion resistance. They are widely used in various industries; their applications are still limited due to manufacturing and machining difficulties and high costs [4]. High-temperature laser beams can decrease the mechanical strength of materials, as shown in Figure 1 [5]. This enables hard-to-cut materials to be cut more with a low cutting force, which can increase machinability
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
