Abstract
The behavior of the relative flow in centrifugal turbomachines is extremely complex due to the existence of various fluid dynamic phenomena and their interaction. At design and off-design operating conditions, the relative flow is subject to stationary unsteadiness, which includes flow separation and wakes associated with passage pressure gradients, secondary flows, and boundary layer stability. It may also be subject to periodic unsteadiness, as are the rotating stall and cyclic flow phenomena induced by the casing. This paper describes detailed measurements of the relative velocity field in a very low specific speed centrifugal pump impeller (Ns = 515). Measurements were conducted by means of a recently developed rotating laser-Doppler anemometry system. Detailed quantitative descriptions of the mean and fluctuating components of the primary and secondary velocity fields are presented for an impeller without volute at design, 50 percent design, and shut-off conditions. The flow pattern in this low specific speed impeller with high blade loading is dominated by the relative eddy (a phenomenon also present in potential flow), which has suppressed suction side separation. The cyclic variation of the impeller exit flow, induced by the volute at low flow rates, is also presented for an impeller fitted with a volute.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.