Abstract
The behaviour of the relative flow in centrifugal turbomachines is extremely complex due to the existence of various fluid dynamic phenomena and their interaction. At design and off-design operating conditions, the relative flow is subject to stationary unsteadiness which includes the flow separation and wakes associated with passage pressure gradients, secondary flows, and boundary layer stability. It is also subject to periodic unsteadiness from the rotating stall and the cyclic flow phenomena induced by the casing. This paper describes the mechanical and optical design of a rotating laser-Doppler anemometry system which allows direct measurement of the relative flow by means of an optical de-rotator. By isolating the impeller rotational frequency from the sampling frequency, it allows direct time-average measurements of the stationary behaviour of the relative flow along with the ensemble (phase)-average measurements of its periodic behaviour. Its success is demonstrated with measurements conducted in a low specific speed centrifugal impeller fitted with a single volute. Sample results of the time-averaged blade-to-blade variation of total relative velocities along with their associated turbulence intensities are reported. The (periodic) cyclic variations of the impeller exit flow, induced by the volute at low flow rates, are also presented for the suction and pressure sides.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.