Abstract
The cooling systems of nuclear power plants are typically made of reinforced concrete water intake structures and special steel pipes, making them large, important structures that necessitate very expensive special productions. In the scope of this research, an innovative design for 4-meter diameter GFRP composite pipes used in nuclear power plant cooling systems was developed using the circular wrapping method. The composite GFRP pipe used in the study has a substantial embedment depth. For this reason, an innovative design was created using unique stiffening rings, and the impact of these rings on the overall behavior was investigated. The nonlinear numerical analysis model of the nuclear power station cooling system, which consists of three pipes with a diameter of 4 m, was then created with ANSYS finite element software using the determined material models, and the results were interpreted. As a result of the study, a composite GFRP pipe design that can be used as a cooling system in significant structures like nuclear power plants has been developed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
