Abstract
In the present study, the lateral load responses and the lateral load capacities of piles in sand under multilayered conditions were investigated. For this purpose, a series of lateral load tests using two model piles was conducted within a calibration chamber under various multilayered soil conditions. The test results were then compared with those obtained under uniform soil conditions. Using the test results, the effect of the multilayered soil conditions on the design components for laterally loaded piles, such as the pile rotation point, the ultimate lateral load capacity, and the lateral soil pressure profile, were analyzed. It was found that the lateral load responses of piles are largely affected by the soil conditions near the surface and the pile base, while the effect of the conditions in the middle-depth layers is relatively small. It was also observed that the depth to the pile rotation point fluctuates during the initial loading, but then becomes stabilized as the level of the load is increased. No significant difference in the depths to the pile rotation point was observed between the uniform and the multilayered soil conditions. Based on the test results in this study, a modified lateral pressure profile, applicable to the estimation of lateral pile load capacities, was proposed to more realistically reflect the effect of multilayered soil conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.