Abstract
The mechanical characteristics of concrete to cross laminated timber (CLT) connections plays an essential role in a hybrid structure. This study mainly deals with an experimental and numerical study on the load-slip behaviour of concrete-CLT connections under cyclic loading, where six specimens with two different loading types (i.e., parallel and perpendicular to the grain of CLT) were executed. The failure modes of all specimens were the bolts shear off at the location of the interface between concrete and CLT, associated with the cracking and splitting of CLT panels depending on loading directions. Then the numerical model whose nonlinearity is concentrated on the spring element is created. To calibrate the model parameters, the procedure of parameter estimation using unscented Kalman filter (UKF) is employed to identify the parameters of a hysteresis model. Two assessment methods, including the equivalent energy elastic-plastic curve assessment and an energy-based damage assessment, are used to comprehensively evaluate the estimated result. The model estimate is consistent with the experimental result, demonstrating the identified parameters having good accuracy. The calibrated parameters of a hysteresis model provide a good database when such type of connections are incorporated into a finite element model of a structural system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.