Abstract
Cellulose nanofiber (CNF) is one of natural fibers, and its Young modulus and tensile strength have been estimated close to 140 GPa and at least 2–3 GPa, respectively. As the homogeneous dispersion method of CNF in polymer matrix, the chemical modification of the CNF surface or solvent exchange process are often used. However, the environmental load of these processes is large, and the chemically modified CNF is expensive. In this study, mechanically defibrillated CNF reinforced epoxy resin matrix (Epoxy-CNF) composites with various CNF volume fraction were fabricated. Their tensile modulus and ultimate strength of the epoxy composites were deteriorated by the CNF slurry addition, while the fracture elongation was increased. This can be attributed to the interaction of epoxy and water, concentration of microvoids, and CNF agglomeration. Thus, the reduced water content in Epoxy-CNF composites improves their tensile properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
