Abstract
In the present work the spray characteristics of bio-ethanol and its blends have been experimentally and theoretically investigated. To have a comprehensive study, the effects of ambient condition and injection pressure on the spray of different blends have been considered. Macroscopic and microscopic characteristics of spray such as tip penetration length, cone angle, projected area, volume, Sauter Mean Diameter (SMD), and Ohnesorge number are investigated precisely. Besides, air entrainment and atomization analysis have been carried out to improve mixture formation process. Using curve fitting and least squares method, theoretical correlations have been suggested in such a way to predict experimental results with the accuracy of 9.9%. To have a good estimation for the calculated parameters, uncertainty analysis has been performed. The results demonstrate enhancing the injection pressure or decreasing the ambient pressure, improve the atomization characteristics of spray. Moreover outcomes of this study indicate, spray tip penetration is enhanced by increasing the injection pressure or bio-ethanol percentage in the blend, while spray cone angle showing opposite behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.