Abstract
The use of bioethanol as an alternative source of fuel could solve energy and pollution concerns. However, its conventional recovery procedures make the overall process costly and energy intensive. Membrane-based pervaporation (PV) has gained significant attention in recent years. Most membranes that purify bioethanol are fabricated from conventional fossil-based polymers. This study presents the first work for biofuel separation by valorizing waste polyethylene terephthalate (PET) bottles into PV membranes. The performance of the membrane was characterized in terms of FTIR, XRD, TGA, WCA, SEM, and AFM and tested for a 10 wt% ethanol–water feed mixture at different temperatures. The mild hydrophobic character of PET allowed the PV membrane to achieve a separation factor of 10.45, a total flux of 1.7 kg m−2h−1, and a pervaporation separation index (PSI) of 18.72 at 45 °C. The recycled PET membrane (rPET) has higher mass transfer resistance for water compared to ethanol. The density functional theory (DFT) analysis confirms a stronger affinity of PET membrane towards ethanol than water. The results showed that rPET membranes have competitive performance compared to conventional fossil-based derived membranes. This study explores an energy-environment nexus approach, which could significantly contribute to achieving the key United Nations’ sustainable development goals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
