Experimental and simulation analysis of flow patterns and energy dissipation through sluice gates in a U-shaped channel

Abstract

Abstract The vertical U-shaped gate holds significant potential for widespread application in flow control within U-shaped channels, as it eliminates the necessity for constructing auxiliary hydraulic structures. The boundary conditions associated with the U-shaped gate are complex, offering distinctive hydraulic features. In this study, the hydraulic characteristics of a vertical U-shaped gate have been investigated by model test and numerical simulation on a U-shaped channel under different flow rates, and the hydraulic evolution process was analyzed. The results show that the minimum relative error of discharges is 0.4%, so the numerical simulation can accurately describe the hydraulic performance of the vertical U-shaped sluice gate. The flow generates a contracted cross-section and presents rhomboid water waves with a ‘hump-like’ convex structure after passing the U-shaped gate, accompanied by large kinetic energy dissipation. The gate opening exerts notable influence on the free surface width. The width of the first contraction section increased by 53.88% as the gate opening ranged from 2.5 to 5.5 cm with a flow rate of 8.24 L/s. The power function relationship of upstream flow Froude number, the width of free surface and the energy loss is established. The results are helpful for engineering designing and operation management of a U-shaped gate.