Experimental and numerical study on projectile impact damage of EBC-SiC/SiC

Abstract

The ingested particles or debris will cause high-speed & low-energy impact to the hot end components of aeroengine. Few literature focus on the projectile impact of SiC/SiC with Environmental Barrier Coating(EBC). The impact of 2 mm projectile was specially studied for Si/Yb2Si2O7/Yb2SiO5-SiC/SiC. Gas gun system was used to conduct impact testing at the speed of 3 m/s∼353m/s. The optical microscope, Scanning Electronic Microscope(SEM), micro CT were used to observe the impact and tension after impact(TAI) damage. For TAI, Digital Image Correlation (DIC) was used to conduct the full-field strain detection around the impact point. Meanwhile, the Smoothed Particle Hydrodynamics (SPH) methodology was programmed in C++ and developed to simulate SiC/SiC impact problem by introducing modified Hashin-Rotem criteria, extending interface method to 3D and adding GPU accelerated algorithm. The results indicate that threshold velocities of EBC huge peeling and SiC/SiC penetration are different, TAI residual strength also has extinct threshold at the velocity of 246 m/s with 37.1% declining extent, and the impact pit depth of SPH simulation is in good agreement with the experiment.