Abstract
This paper proposed a new type of demountable T-bolt shear connector to improve the disassembly efficiency of composite beams and realize the sustainable of the structure components. The shear behavior of nine groups of push-out specimens was experimentally investigated through monotonic loading push-out tests. The finite element analysis (FEA) models were validated against the test results, specifically in terms of the load-slip responses and failure modes of the T-bolt shear connectors in these push-out specimens. The obtained results show that all the specimens have no obvious deformation and cracks in the steel beam and RC slab. The separation between the slab and the steel beam is no more than 1 mm, indicating that the anti-lifting ability is excellent. Moreover, parametric analysis demonstrates that increasing the bolt pretension of the T-shaped shear connector and the friction coefficient between the bridge gasket and the steel beam significantly enhances the initial stiffness and ultimate strength of the shear connectors. However, the shear behavior is relatively insensitive to variations in the channel thickness and bolt grade. Based on regression analysis, a load-slip mechanical model has been proposed. This model accurately describes the mechanical properties of this type of shear connector, providing a theoretical foundation for the application of demountable composite beams.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
