Experimental and numerical investigations on non-synchronous vibration and frequency lock-in of transonic compressor rotor blades

Abstract

Non-synchronous vibration (NSV) problems in axial compressors are challenging and frequently result in high vibration stress or structural failure within the frequency lock-in region. A deeper understanding of the lock-in phenomenon in NSV is necessary to improve blade reliability and safety. In this study, an experiment was conducted on a multistage transonic axial compressor to obtain frequency lock-in characteristics. The enforced motion of the flexible blade simulation method was used to study the frequency lock-in mechanism between blade vibration and tip unstable flow. The results showed that the aerodynamic frequency characteristic changed from a broadband spectrum to a distinct frequency peak as the NSV onset. The nonlinear vibration pattern could maintain the limited cycle oscillation for 26 s. The vibration stress of the frequency locked-in case was approximately 19 times that of the frequency unlocked one. The pressure fluctuations generated by the large-scale radial separation vortex structures were stronger than those of the tip leakage flow, and the third-order harmonic frequency of the circumferential instability flow was close to the first-order bending model natural frequency. The periodic shedding and reattachment process of flow separation provided the initial non-synchronous aerodynamic excitation source. The frequency lock-in phenomenon occurred at a maximum vibration amplitude of 2 % and 3 % tip chord length. The tip unstable flow characteristics were consistent and entirely dominated by blade vibration.