Experimental and numerical investigations into the fabrication of alumina ceramic surface microchannel by electrochemical discharge machining

Abstract

The electrochemical discharge machining (ECDM) is an advanced and promising technology for fabricating micro structures. This method is effectively applicable for non-conductive hard and brittle materials micromachining, such as glass and ceramics. However, the ceramics high melting point and intense heat exchange effects during microchannel fabrication lead to the easy dissipation of thermal energy and the difficulty in processing. To address this issue and expanded the ECDM processing range. This paper dedicated to the investigation of the material removal mechanism and process characteristics for the alumina ceramic surfaces microchannels preparation. Firstly, this study explained the difference of the ECDM critical applied voltage and gas film generation mechanism by analyzing the volt-ampere characteristic curve of 20 wt% NaOH electrolyte with a tool immersed depth of 2 mm and 10 mm respectively. Then, a thermal removal finite element model (FEM) for ECDM was developed. The heat cumulative and intermittent cooling effects applied on the alumina ceramic surface dominated the materiel removal. Additionally, it can be found that the microchannel machining accuracy and bottom surface quality depended on the Gaussian heat source characteristics, gas film formation mechanism, heat accumulation effect, and temperatures spatial and temporal distribution. And a series of single factor experiments for evaluating the parametric studies such as the effect of discharge frequency, applied voltage, duty ratio and tool feed rate on the fabricated microchannel performance are executed. Finally, the complex three-dimensional structures of cross microchannel grid and zigzag microchannel array with variable depth were successfully fabricated on aluminum oxide ceramic surface. Notably, the results highlighted and enriched the ECDM stability, consistency and applicability for alumina ceramic surface microchannel fabrication.