Abstract
Hydrokinetic technologies harvest renewable power by harnessing the kinetic energy of water from free-flowing rivers, streams, dam head/tailrace and irrigation channels. Savonius rotor is one of the simple and low-cost vertical axis drag type devices used for the extraction of hydrokinetic power. The main limitation of Savonius hydrokinetic turbine is its low efficiency due to negative torque developed by the returning blade without augmentation techniques. In this paper, an experimental investigation is carried out in a multipurpose tilting water flume using V-shaped rotor blade profiles by maintaining a fixed V-angle of 90°, varying length of V-edges, arc radius and with a constant aspect ratio of 0.7. The simulations were carried out using commercial software, ANSYS Fluent. From the experimental and numerical results, it was found that, the optimum blade profile (V4) has developed a maximum coefficient of power 0.22 and 0.21 respectively, at a tip speed ratio 0.87. It was found that, the maximum coefficient of power of optimal V-shaped blade profile (V4) is 19.3% higher than the semi-circular blade profile.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
