Abstract
AbstractThis study investigated the sintering behavior of an yttria‐stabilized zirconia coating for thermal barrier coatings (TBCs) with a complicated porous structure via both experiment and simulation using the finite element method for samples with only a coating (free coating) and samples with coating on a substrate (constrained coating). Sintering and grain growth proceeded from the bottom of the coating, and the coating bent convex upward in the free coating. In the constrained coating, sintering and grain growth proceeded in a manner similar to the free coating; however, the degrees of sintering and grain growth were small. Furthermore, sintering and grain growth were delayed because of substrate constraints. As a simulation result, the free coating was bent in a manner similar to the experiment. The experimental results could be reproduced in terms of time dependency and temperature dependency. The decrease in the porosity of the constrained coating was delayed compared with that in the free coating because of substrate constraints. This simulation result was able to reproduce the experimental results. Thus, the sintering behavior for the complex porous structures of TBCs can be predicted by experimental research and simulation, which could aid in the development of a prediction technology for the delamination of coatings (TBC lifetime).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
