Ex Vivo Biomechanical Comparison of Four Techniques to Tibiotarsus Osteosynthesis in Adult Laying Hens (Gallus gallus domesticus).

Abstract

To assess the biomechanical parameters of intact tibiotarsi (INT) and tibiotarsi with a 5-mm segmental diaphyseal defect repaired using four osteosynthesis techniques: a locking plate (LP), a plate-rod combination, an external skeletal fixator (one end-threaded positive-profile pin per fragment) with an intramedullary pin tie-in (TIF 1), and an external skeletal fixator (two end-threaded positive-profile pins per fragment) with an intramedullary pin tie-in (TIF 2). Sixty tibiotarsi from 30 adult laying hens were allocated into five groups for nondestructive dynamic torsion and four-point bending tests, followed by failure tests. Nondestructive dynamic tests evaluated stiffness over time in torsion and bending. Torsion destructive tests provided maximum torque and rotation values, whereas the four-point bending tests provided the yield load, maximum bending load, and maximum displacement. The INT group showed higher torsional stiffness and maximum torque but similar bending stiffness, torsional strength, and bending strength in one or more groups. LP and TIF 2 exhibited the highest similarity frequencies among the treatment groups, whereas the TIF 1 group displayed lower stiffness and strength for most of the evaluated parameters. Similar results for LP and TIF-2 groups suggest the biomechanical equivalence of these methods for tibiotarsal osteosynthesis in adult hens.