Abstract
Low pressure capacitively coupled He–O2/Ar mixture plasma is investigated using optical emission spectroscopy and Langmuir probe (LP) techniques and the effects of discharge parameters i.e. radio frequency (RF) power, filling gas pressure and oxygen concentration on electron density (ne), electron temperature (Te), excitation temperature (Texc), plasma potential (Vp) and electron energy probability function (EEPF) are monitored. It is noted that increases with increase in RF power and filling gas pressure, while it decreases with increasing O2 concentration. The LP technique and Boltzmann plot method are employed to determine and and estimated by both methods shows similar decreasing trend with increasing RF power and filling gas pressure. A sudden increase in and decrease in is noted with RF power, indicating a mode transition i.e. from alpha to the gamma mode. The threshold RF power for the mode shifts from higher to lower value (150–120 W) with increasing gas pressure (0.3–0.5 mbar). This trend reverses and shifts from lower to higher RF value i.e. from 110 W (pure helium) to 150 W (8% O2) with increase in O2 concentration. Investigation of EEPF profile states evolution from Druyvesteyn-like to bi-Maxwellian distribution with increase in RF power and filling gas pressure; due to mode transition and decrease in the height of high energy tail of EEPF. Similarly, the effect of O2 mixing on the shape of EEPF is also investigated. It is noted that in pure helium discharge the EEPF is bi-Maxwellian in nature, while addition of O2 in the mixture results in the broadening of the EEPF. Moreover, the height of high energy tail of EEPF also increases. Finally, an increasing trend in atomic oxygen density is noted with increase in RF power, pressure and O2 concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.