Abstract

The equivalent filter characteristics of variational mode decomposition (VMD) are fully evaluated when applied to the fractional Gaussian noise (fGn) and the application in separating closely spaced modes of vibration system is performed in this paper. VMD is a newly proposed signal decomposition technique, which nonrecursively decomposes a signal into a given number of subsignals (modes), and each mode is mostly compact around a center pulsation. The filter performance of VMD is largely dependent on the constraint parameter and the initialization of center frequencies. In order to extract the desired modes, criteria for the determination of decomposition parameters are established. The initial center frequencies could be simply determined by prior estimated modal frequencies of the analyzed signal, while the constraint parameter is optimized utilizing a genetic algorithm (GA). A two-degree-of-freedom parametric system is considered to evaluate the capability of VMD in the separation of closely spaced modes. Compared with the noise-assisted versions of empirical mode decomposition (EMD) and wavelet packet transform (WPT), the parameter-optimized VMD can successfully separate the closely spaced modes while recovering the most modal information simultaneously. When introduced to the ground vibration test (GVT) of a horizontal tail, the proposed method successfully extracted the first five oscillation modes and identified the modal parameters accurately.

Highlights

  • Empirical mode decomposition (EMD) introduced by Huang et al [1] is widely used to adaptively decompose a signal into separate spectral bands with different oscillation modes

  • The equivalent filter characteristics of variational mode decomposition (VMD) are studied when applied to the fractional Gaussian noise (fGn), and the application in the separation of closely spaced modes of vibration system is performed

  • The initialization along with the constraint parameter α does have a great impact on the decomposition performance of VMD

Read more

Summary

Introduction

Empirical mode decomposition (EMD) introduced by Huang et al [1] is widely used to adaptively decompose a signal into separate spectral bands with different oscillation modes. Many EMD-based modal parameter identification methods have been proposed and had great impact on a variety of engineering applications [3,4,5,6]. Some noise-assisted versions of EMD such as Ensemble EMD (EEMD) [7], Complementary EEMD (CEEMD) [8], and Complete EEMD with Adaptive Noise (CEEMDAN) [9] have been proposed to refine the decomposition performance Those attempts to overcome the limitations of EMD do not fundamentally change the essence of EMD as a dyadic filter bank [10].

VMD Analysis on fGn
Separation of Modes Based on VMD
Conclusions

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.