Abstract
In the present study, wear and corrosion resistances of magnesium alloys were analyzed after coated by micro arc oxidation (MAO) process for potential protection of gear component, which is the most wearing part of a conventional bicycle. Two of the most common magnesium alloys (AZ31 and AZ91) were used in the study and they were oxidized in three different electrolytes (aluminate-, silicate-and phosphate-based). Scanning electron microscopy (SEM) was utilized in order to analyze the coating morphology and wear tracks obtained during wear tests. Energy dispersive X-ray spectroscopy (EDS) analyses were implemented to determine the elemental composition of the coatings. Wear and corrosion tests were applied to compare the performances of the coatings. Experimental results showed that wear and corrosion resistances of the samples generally increased after coated by MAO process and the best protection against wear and corrosion related failures, was achieved by utilizing silicate-based electrolyte for MAO process of magnesium alloys under selected process parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.