Abstract
Abstract Boron carbide (B4C) ceramics with high thermal stability and relatively large cross-section for fast neutron absorption have been used as neutron absorbers of the control rods for the fast breeder reactors (FBR). However, cracks induced in B4C pellets due to thermal stress and swelling during neutron irradiation have been one of the practical problems, which leads to short lifetime of the control rods. It is essential to improve the mechanical properties of B4C ceramics for suppressing the cracking of B4C pellets and to enhance the thermal conductivity for relaxation of thermal stress during neutron irradiation. According to our previous study, the fracture toughness and thermal conductivity of B4C ceramics were enhanced by carbon nanotube (CNT) addition. In the present work, we report the dependence of the thermal and mechanical properties on the CNT-orientation in the sintered body prepared by hot-pressing and the enhancement of thermal shock fracture resistance of the obtained B4C/CNT composites. The thermal shock fracture resistance of hot-pressed B4C/CNT composites was evaluated by means of thermal shock test with a high-frequency induction-heating furnace. The dependence of the thermal properties on the CNT-orientation and the enhancement of thermal shock resistance of B4C ceramics were confirmed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
