Abstract
This paper deals with the irradiation effects on the thermal shock resistance Δ = σtk/Eα (σt : tensile strength, k: thermal conductivity, E: Young's modulus, α: thermal expansivity) and the thermal shock fracture toughness ∇=KIck/Eα (KIc : fracture toughness value of mode I) in addition to other mechanical properties such as the diametral compressive strength and fracture toughness of two kinds of near isotropic graphite neutron irradiated at 750∼1,000°C to a dose of (1.1 ∼ 1.5)1021 n/cm2 (>29 fJ). One of the graphite specimen is an isostatically molded graphite IG-11 with fine grain petroleum coke and the other is a binderless molded graphite HCB-18 which was prepared using mesophase pitch carbon with very fine grain size. These measurements are carried out by means of disk testing method developed by us. Results show that both the thermal shock resistance and the thermal shock fracture toughness of the two kinds of graphite after irradiation decrease considerably in contrast with increasing trends of th...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
