Evaluation of the residual carrying capacity of a large-scale model bridge through frequency shifts

Abstract

Structural systems are often subjected to degradation processes due to different kinds of phenomena like unexpected loadings, ageing of the materials, and fatigue cycles. This is true, especially for bridges, in which their safety evaluation is crucial for planning maintenance activities. This paper discusses the experimental evaluation of the residual carrying capacity from frequency changes due to distributed damage scenarios. For this purpose, in the laboratory of the University of Bologna, an experimental reinforced concrete model bridge was built and loaded. The applied forces produced bending moments causing up to three increasing levels of damage severity, namely early and diffused concrete cracking, and finally rebar yielding. By processing the acceleration signals recorded during the dynamic tests on the model bridge, the main natural frequencies of the bridge were obtained and the remaining bearing capacity was estimated based on the damage state. The opening and closure of cracks during a dynamic excitation produced a biased estimation of natural frequencies related to each damaged condition. The frequency decay predicted by the theory of breathing cracks applied to the performed experiments properly estimated the losses in the carrying capacity.