Abstract
Ti-34Nb-6Sn alloy were prepare by powder metallurgy milled in two different times (40 and 60 min) using Ti and Nb hydrides with or without Mg, as spacer then sintered at 700ºC and 800ºC. Characterizations were made by scanning electron microscope (SEM), X-ray diffractometer (XRD) and by Archimedes. Microhardness was measured by Vickers microhardness. Mesenchymal stem cells derived from equine bone marrow (BMMSCs) were used to evaluate the sample cytotoxicity. Hydration and dehydration process was confirmed, also the formation of brittle particles during the milling. Materials were structured under α and β phase, and the samples that received Mg as a spacer had slightly lower β phase content compared to samples without Mg, suggesting difficult α→β transformation due to the presence of barriers formed by pores. Mg provided greater porosity, and prepared milled in a shorter time promoted an increase in the macropores. Microhardness was similar to that of commercial materials (i.e., CP-Ti and also to other alloys with similar nominal composition. Cells treated with conditioned medium with the samples showed viability comparable to the control group, and after 48 h of culture on the samples, there was significant growth and more circular morphology, when adhered on materials that received Mg.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
