Abstract

It is known that liquid metal embrittlement (LME) is strongly dependent on a so-called `intimate contact' between the solid and liquid metal (LM) phases. This point is emphasised in this paper aimed at determining suitable contact conditions to favour LME of T91 steel after short exposure to stagnant molten Pb or Pb–55%Bi. The temperature range ( T∼540°C) is high with respect to the expected operating conditions of spallation targets. We determine three temperature cycles, in pure lead or lead–bismuth under flowing He–4%H 2 for LME testing. Good contact is obtained between T91 and Pb–Bi, but poor contact between T91 and Pb. Accordingly, the T91 steel tensile properties are not degraded by Pb, but modified after exposure to Pb–Bi. In such case, rupture of the test bar occurs in regions where Pb–Bi is `adherent' onto the steel. The rupture facies is not fully ductile as for T91 in Pb.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.