Evaluation of the Flexibility for Catalytic Ozonation of Dichloromethane over Urchin-Like CuMnOx in Flue Gas with Complicated Components.

Abstract

The evaluation of the poisoning effect of complex components in practical gas on DCM (dichloromethane) catalytic ozonation is of great significance for enhancing the technique's environmental flexibility. Herein, Ca, Pb, As, and NO/SO2 were selected as a typical alkaline-earth metal, heavy metal, metalloid, and acid gas, respectively, to evaluate their interferences on catalytic behaviors and surface properties of an optimized urchin-like CuMn catalyst. Ca/Pb loading weakens the formation of oxygen vacancies, oxygen mobility, and acidity due to the fusion of Mn-Ca/Pb-O, leading to their inferior catalytic performance with poor CO2 selectivity and mineralization rate. Noticeably, the presence of As induces excessively strong acidity, facilitating the inevitable formation of byproducts. Catalytic co-ozonation of NO/DCM is achieved with stoichiometric ozone addition. Unfortunately, SO2 introduction brings irreversible deactivation due to strong competition adsorption and the loss of active sites. Unexpectedly, Ca loading protects active sites from an attack by SO2. The formation of unstable sulfites and the released Mn-O structure offset the negative effect from SO2. Overall, the catalytic ozonation of DCM exhibits a distinctive priority in the antipoisoning of metals with the maintenance of DCM conversion. The construction of more stable acid sites should be the future direction of catalyst design; otherwise, catalytic ozonation should be arranged together with post heavy metal capture and a deacidification system.