Abstract
Sugarcane vinasse is a by-product obtained during ethanol production in sugar-ethanol plants. For each 1 L of ethanol produced approximately 11 L of vinasse are generated. As this residue is obtained in high amounts, it is used as fertilizer in sugarcane crops. However, despite being rich in nutrients, sugarcane vinasse is approximately one hundred times more polluting than domestic sewage, making it an environmental problem. Thus, the aim of the present study was to propose a treatment sequence for sugarcane vinasse and evaluate the possibility of energetic use of the generated sludge in the coagulation/flocculation stage. pH, conductivity, turbidity and decreases in UV/Vis absorption spectra were determined for each treatment step. In addition, the upper calorific value of the generated sludge was also determined, while ash (adsorption treatment) and catalyst (heterogeneous photocatalysis) characterizations were also carried out. At the end of the treatment, initial vinasse turbidity was reduced by 100% and pH and conductivity values were stabilized. The sludge presented a higher calorific value of approximately 3,000 kcal kg−1 and the ash and catalyst displayed favorable characteristics to be applied to the sugarcane vinasse treatment stages.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have