Abstract
Mpox virus (MPXV) infections have increased in many countries since May 2022, increasing demand for diagnostic tests and research on the virus. To ensure personnel safety, appropriate and reliable measures are needed to disinfect and inactivate infectious samples; Methods: We evaluated the stability of infectious MPXV cultures stored at different temperatures and through freeze-thaw cycles. Heat physical treatment (56 °C, 70 °C, 95 °C), chemical treatment (beta-propiolactone (BPL)) and two commercialized disinfectants (Micro-Chem Plus (MCP) and ethanol) were tested against infectious MPXV cultures; Results: The results indicated that MPXV stability increases with lower temperatures. The MPXV titer was stable within three freeze-thaw cycles and only decreased by 1.04 log10 (lg) 50% cell culture infective dose (CCID50) per milliliter (12.44%) after twelve cycles. MPXV could be effectively inactivated at 56 °C for 40 min, 70 °C for 10 min, and 95 °C for 5 min. For BPL inactivation, a 1:1000 volume ratio (BPL:virus) could also effectively inactivate MPXV. A total of 2% or 5% MCP and 75% ethanol treated with MPXV for at least 1 min could reduce >4.25 lg; Conclusions: MPXV shows high stability to temperature and freeze-thaw. Heat and BPL treatments are effective for the inactivation of MPXV, while MCP and ethanol are effective for disinfection, which could help laboratory staff operate the MPXV under safer conditions and improve operational protocols.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.