Evaluation of secondary compression of sands and silts from CPTU

Abstract

The estimate of secondary compression behaviour of sandy and silty deposits is not routinely taken into account in the classical settlement calculation, due to its generally limited contribution to the total amount of strains. However, such soils exhibit a non-negligible time-dependent behaviour and the prediction of their long-term response may sometimes be important. This paper explores the capability of the piezocone test as an effective tool to estimate the one-dimensional secondary compression characteristics of sands and silts. The approach is mainly based on the observation that frictional response essentially governs both secondary compression of granular soils and cone resistance, hence it seems reasonable to establish a valid correlation among them. The study uses part of the field data assembled over the last years at the Treporti Test Site (Venice, Italy), within an extensive research project aimed at analysing the stress-strain-time response of the predominantly silty sediments forming the Venetian lagoon subsoil. Empirical, site-specific correlations for estimating the secondary compression coefficient from cone resistance are proposed. The regression analyses indicate that the estimate is slightly improved if the cone resistance-based correlations include a variable accounting for the different pore pressure response associated to the drainage conditions around the advancing cone.