Abstract
The reliability and usefulness of the reaction rate distribution data measured in the prototype fast breeder reactor Monju were examined through a comparison with a calculation using JENDL-4.0, mainly focusing on shielding regions around the reactor core. The reaction rates of 238U (n,f) and 58Ni (n,p) sensitive to high-energy neutrons were all judged reliable. The calculation-to-experiment values were slightly worse in the shielding regions; however, those for the 58Ni (n,p) reaction rates were improved by employing JEFF-3.3 instead of JENDL-4.0. A different tendency was observed between the two reactions, probably due to the 238U (n,f) cross section in the energy range of around 700 eV. The reaction rates of 235U (n,f), 239Pu (n,f), 238U (n,γ), and 197Au (n,γ) sensitive to the lower-energy neutrons were mostly judged reliable. The data in the lower axial shielding region are less reliable but may be acceptable for the shielding calculation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
