Abstract
Abstract In situ tests such as the traditional plate load tests (PLT) or light weight deflectometer (LWD) tests can be used for determining the stiffness parameters of pavement layers, since field measurements yield more practical and realistic results. The stiffness parameters of twelve large-scale laboratory specimens, prepared using four fines contents and three moisture contents, were measured almost simultaneously with PLT and LWD tests. The impacts of variation in fines content and moisture content of base specimens on the moduli measured with these two tests were evaluated, reported and discussed. The LWD moduli demonstrated the same pattern as the PLT moduli computed with different plate diameters and contact pressures. The strongest correlation between the LWD and PLT moduli was observed when the loading plate diameters were the same and the peak contact pressures were similar.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have