Abstract
The pitting corrosion resistance of duplex stainless steels UNS S31803 annealed at different temperatures ranging from 1050 °C to 1200 °C for 24 h has been investigated by means of potentiostatic critical pitting temperature (CPT). The microstructural evolution and pit morphologies of the specimens were studied through optical microscopy and scanning electron microscopy. The potentiostatic CPT measurements show that the CPT was elevated with the annealing temperature increased from 1050 °C to 1150 °C and decreased as the temperature further increased to 1200 °C. The specimens annealed at 1150 °C exhibited the highest CPT and the best pitting corrosion resistance. The pit morphologies show that the pit initiation sites transfer from austenite phase to ferrite phase as the annealing temperature increases. The results were explained by the variation of pitting resistance equivalent number (PREN) of ferrite and austenite phases as the annealing temperature was varied.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
