Evaluation of mechanical and thermal properties of fabricated Sansevieria and Kaans fiber/Egg shell powder reinforced with polyester matrices

Abstract

PurposeThe purpose of this study is to fabricate and compare the mechanical and thermal properties of Sansevieria and Kaans fiber reinforced polyester matrices composites.Design/methodology/approachTreated Sansevieria and Kaans fiber was used as reinforcement for the fabrication of polymer matrix composites. Kaans fiber, which was available plenty in the delta region, but physical and mechanical properties of Kaans fiber were low when it compared with Sansevieria fiber. To make use of Kaans fiber for the fabrication of composite, the physical and mechanical properties have to be enhanced. So Egg shell powder was selected as a filler material to enhance the Kaans fiber reinforced composite. The selected fibers were properly weaved after alkali treatment. A three-layered (0°/45°/0°) Sansevieria fiber reinforced polymer (S-FRP) and Kaans fiber reinforced polymer (K-FRP) composite plates were fabricated using the compression molding method. As per American Society for Testing and Materials standards, the specimens were cut and mechanical, thermal and absorption properties of Sansevieria and Kaans fiber composites were investigated experimentally.FindingsTensile and flexural test reveals that K-FRP composite has good ductility and bending property than S-FRP composite plate. But from the other test results, S-FRP possesses high elongation capability than K-FRP. Thermo gravimetric analysis, moisture absorption and swelling test too done which clearly appeared S-FRP composite plate has prevalent execution than K-FRP composite plate.Originality/valueThis original research study enlists the mechanical, thermal properties and absorption properties of fabricated S-FRP and K-FRP composite plates.