Abstract
To increase the reliability of wireless-based monitoring systems under ionizing radiation environments, multiple diversified commercial off-the-shelf (COTS) modules have been used to achieve radiation tolerance. This paper presents experimental results of radiation tests on key modules in wireless-based monitoring systems, which include analog signal processing circuits, analog-to-digital converter (ADC) modules, microcontroller modules, and wireless transmission modules. In total, 12 modules have been evaluated, (i.e. 3 analog modules, 3 ADCs, 3 microcontrollers, and 3 wireless transmission modules). The radiation tests are conducted using the gamma radiator at The Ohio State University Nuclear Reactor Lab (OSU-NRL). The performance parameters of these 12 modules are investigated under high dose rate (20 krad(Si)/h). Experimental results have shown that the tested modules perform satisfactorily with little sign of degradation until the total dose levels reach the tolerable limits for these modules. Experimental results support the fact that, by using diversified COTS components, one may be able to achieve equivalent performance as those built by using radiation-hardened components, but with a considerable cost-saving. Furthermore, the tests also show that digital modules, particularly, with higher speed processors (i.e. microcontrollers) may be more susceptible to radiation than other types of modules. Therefore, additional shielding should be used to protect them.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.