Abstract
Hot corrosion was recognised as a serious problem in connection with the degradation of fireside boiler tubes in coal fired steam generating plants. It is one of the most deleterious forms of surface degradation which can lead to the loss of mechanical strength and catastrophic failure of structural and engineering components. In the present investigation, an attempt has been made to evaluate the hot corrosion behaviour of high velocity oxyfuel (HVOF) sprayed Ni–5Al and NiCrAl coatings on iron based superalloy in an actual coal fired boiler environment. The coated specimens were hung in the low temperature superheater zone (∼700°C) of a coal fired boiler. The studies were carried out for 10 cycles each cycle consisting of exposing the coated specimens for 100 h followed by 1 h cooling to ambient conditions. NiCrAl coated specimen provided better resistance to hot corrosion than Ni–5Al coated specimen in the given environment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.