Abstract
When combined with high-speed photography technology, the digital image correlation (DIC) method provides an excellent photographic image processing capability that can be used to convert the evolving full-field surface properties of structures to sets of two-dimensional (2D) or three-dimensional (3D) coordinate values. In this study, the applicability of the DIC method and high-speed cameras in underground mining was investigated by measuring the displacement and vibration of rock pillars caused by blasting. This technique is used extensively in engineering and is increasingly being applied to new fields. As a result of comparing the DIC results for blast vibration with the measured values of the contact sensor through field tests, the maximum displacement and vibration speed were found to be 86% and 93% accurate, respectively. In addition, the obtained values appeared similar to those predicted through numerical analysis. Field test results indicate that both methods yielded similar results. Therefore, it is concluded that it is feasible to use the DIC and high-speed camera to measure ground displacements and vibrations from blasting in underground mining. In addition, the system conditions required for blast vibration measurement were considered by comparing the accuracy with the existing measurement methods.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call