Evaluation of extremely thin polycrystalline germanium films and their TFT performance fabricated at 400 °C by Cu-induced crystallization on a glass substrate

Abstract

Germanium (Ge) has high mobility and is more suitable for low-temperature device processes than silicon (Si); thus, it has attracted attention as an upper-layer transistor for monolithic three-dimensional (M3D) integration. We evaluated in detail the crystalline quality of extremely thin polycrystalline-Ge (poly-Ge) thin films thinner than 15 nm fabricated by metal-induced crystallization using copper (Cu-MIC) at 400 °C using micro-Raman scattering, in-plane X-ray diffraction, transmission electron microscopy (TEM), TEM energy dispersive X-ray spectroscopy, and TEM electron diffraction. Additionally, the films were applied to p-ch double-gate (DG) poly-Ge thin-film transistors (TFTs), and their performance was evaluated. As a result, a high I on/I off ratio of 2.8 × 103 was realized by crystallization at 400 °C with a ratio equal to that of crystallization at 500 °C. This study demonstrated the feasibility of Cu-MIC DG poly-Ge TFTs for M3D applications.