Evaluation of diethylenetriaminepentaacetic acid modified chitosan immobilized in amino-carbmated alginate matrix as a low cost adsorbent for effective Cu(II) recovery

Abstract

Abstract In present work, facile synthesis of a biocompatible hybrid biosorbent based on diethylenetriaminepentaacetic acid (DTPA) modified chitosan immobilized in organo-functionalized sodium alginate matrix (DTPA-MCSA) was carried out. DTPA-MCSA was casted in microspherical hydrogel beads. Three dimensional microporous geometry of the biosorbent remained well preserved as observed in SEM analysis which revealed the improved mechanical strength of the alginate matrix. Surface functionalization of base biopolymers was confirmed by FTIR and SEM analysis. Equilibrium sorption studies using DTPA-MCSA for Cu(II) from aqueous medium were carried out in batch mode and found considerably dependent on pH, contact sorption time, temperature and initial copper concentration. Isothermal sorption data showed close correlation with Langmuir model as evident from nonlinear fitting of data (R 2 ˜ 0.99) at different temperatures. The experimental sorption capacity (q e) was found nearly 67 mg/g using 100 mg/L initial concentration of copper ions. Kinetic studies were conducted using different initial concentrations for better elucidation of results and it showed better correlation with pseudo second order rate equation which unveiled that strong ion pair coordination and complexation exist between Cu(II) and newly grafted chelating sites of DTPA-MCSA. Thermodynamic parameters suggested that the adsorption process is spontaneous and endothermic. The results concluded that DTPA-MCSA could be a better candidate for adsorptive remediation of copper ions from liquid waste.