Evaluation of classified ground points from National Agriculture Imagery program photogrammetrically derived point clouds

Abstract

ABSTRACT Studies have shown that digital surface models and point clouds generated by the United States Department of Agriculture’s National Agriculture Imagery Program (NAIP) can measure basic forest parameters such as canopy height. However, all measured forest parameters from these studies are evaluated using the differences between NAIP digital surface models (DSMs) and available lidar digital terrain models (DTMs). A survey of NAIP point cloud classification and related ground point-generated DTMs has not yet been undertaken. This study applies a Support Vector Machine (SVM) to classifying ground and nonground points from NAIP point clouds for test sites in Wyoming and Arizona, USA. Light detection and ranging (lidar) data from the U.S. Geological Survey 3D Elevation Program (3DEP) are used to validate the classified NAIP ground points and their corresponding DTMs. Comparing height differences between filtered NAIP ground points and 3DEP ground points, the SVM classifier’s results show that the vertical root mean square error value is 1.87 m and 1.69 m for the Wyoming and Arizona sites, respectively. If NAIP point clouds were continuously measured, the resulting availability of medium-resolution DTMs would benefit the application of multitemporal forest health monitoring and DTM generation.