Abstract
Biogas is commonly upgraded to biomethane to produce a better biofuel. The aim of this work is to compare different types of solvents in biogas upgrading while using an absorber-stripper process. A conventional single-loop absorber-stripper process configuration was simulated with ProMax® for three types of solvents: diglycolamine (DGA), dimethyl ethers of polyethylene glycol (DEPG) and water. Absorption temperature, absorption pressure, CO2 concentration, solvent circulation rate and steam rate (only for DGA) were considered as varying parameters. The effects of these parameters on energy consumption, CO2 capture and CH4 recovery were studied by applying response surface methodology (RSM) to the simulations of the processes. The comparison of the processes at the optimum operating conditions for RSM with the three solvents has shown that the process with water is the simplest and most robust of the three, obtaining high levels of CO2 capture and CH4 recovery with the lowest energy consumption.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
