Abstract
Lahars are among the most serious and far-reaching volcanic hazards. In regions with potential interactions of lahars with populated areas and human structures the assessment of the related hazards is crucial for undertaking appropriate mitigating actions and reduce the associated risks. Modeling of lahars has become an important tool in such assessments, in particular where the geologic record of past events is insufficient. Mass-flow modeling strongly relies on digital terrain data. Availability of digital elevation models (DEMs), however, is often limited and thus an obstacle to lahar modeling. Remote-sensing technology has now opened new perspectives in generating DEMs. In this study, we evaluate the feasibility of DEMs derived from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and the Shuttle Radar Topography Mission (SRTM) for lahar modeling on Popocatépetl Volcano, Mexico. Two GIS-based models are used for lahar modeling, LAHARZ and a flow-routing-based debris-flow model (modified single-flow direction model, MSF), both predicting areas potentially affected by lahars. Results of the lahar modeling show that both the ASTER and SRTM DEMs are basically suitable for use with LAHARZ and MSF. Flow-path prediction is found to be more reliable with SRTM data, though with a coarser spatial resolution. Errors of the ASTER DEM affecting the prediction of flow paths due to the sensor geometry are associated with deeply incised gorges with north-facing slopes. LAHARZ is more sensitive to errors of the ASTER DEM than the MSF model. Lahar modeling with the ASTER DEM results in a more finely spaced predicted inundation area but does not add any significant information in comparison with the SRTM DEM. Lahars at Popocatépetl are modeled with volumes of 1 × 10 5 to 8 × 10 6 m 3 based on ice-melt scenarios of the glaciers on top of the volcano and data on recent and historical lahar events. As regards recently observed lahars, the travel distance of lahars of corresponding volume modeled with LAHARZ falls short by 2 to 4 km. An important finding is that the travel distance of potential lahar events modeled with LAHARZ may differ by about 2 km when using SRTM or ASTER data because of varying lateral flow-volume distribution. As a consequence, verification and sensitivity analysis of the DEM is fundamental to deriving hazard maps from predicted modeled inundation areas. Because of the global coverage of this type of remote-sensing data, the conclusion that both SRTM and ASTER-derived DEMs are feasible for lahar modeling opens a wide field of application in volcanic-hazards studies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.