Abstract
AbstractEthylene glycol‐assisted sol‐gel method is employed for preparing LiNi1/3Co1/3Mn1/3O2 used as cathode material in lithium‐ion batteries. The prepared material has higher c/a value and lower cationic mixing degree of Li+/Ni2+, illuminating a more orderly structure, smaller particle size and more regular particle shape, which shorten the diffusion length for Li+ ions and allow the rapid kinetics of Li+ ions diffusion. Sure enough, the as‐prepared LiNi1/3Co1/3Mn1/3O2 material displays the first discharge capacity of 208 mAh g−1 and keeps 133 mAh g−1 after 200 cycles between 2.5 and 4.5 V at 0.2 C. In addition, it demonstrates excellent rate capacity of 143 mAh g−1 at 2 C. The results show that LiNi1/3Co1/3Mn1/3O2 prepared by this method has high discharge capacity, admirable rate capability and exceptional cycle stability, which provides significant insights into the synthesis of other layered oxides as cathode materials for lithium‐ion batteries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.