Abstract
Nanocrystalline CuO-CuFe2O4 composite thin films were developed from CuFeO2 ceramic target using a radio frequency sputtering method followed by a thermal oxidation process. This fabrication process helps to develop porous sensing layers which are highly desirable for solid state resistive gas sensors. Their sensing properties towards ethanol and hydrogen gas in dry air were examined at the operating temperatures ranging from 250 deg C to 500 deg C. The electrical transients during adsorption and desorption of the test gases were fitted with the Langmuir single site gas adsorption model. A composite thin film with a total thickness of 25 nm showed highest response (79%) towards hydrogen (500 ppm) at the operating temperature of 400 deg C. The shortest response time (tres) was found to be ~60 and ~90 seconds for hydrogen and ethanol respectively. The dependence of the response of the sensor on gas concentration (10-500 ppm) was also studied.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
