Abstract
Etching characteristics of Pb{(Mg 1/3Nb 2/3) 0.9Ti 0.1}O 3 (PMN–PT) were studied by an inductively coupled plasma etcher using Ar, Cl 2, and BCl 3 gas combinations. Using Ar/BCl 3 and Cl 2/BCl 3, PMN–PT etch rates higher than 2500 Å/min could be obtained with the etch selectivity over photoresist higher than 1.0. In general, the increase of BCl 3 in Ar/BCl 3 and Cl 2/BCl 3 increased etch selectivity without decreasing PMN–PT etch rates significantly. X-Ray photoelectron spectroscopic analysis revealed that, during the PMN–PT etching, Ar ion bombardment enhanced the etching of Pb and Ti components preferentially, BCl 3 plasma enhanced the etching of O, Nb, and Mg components, and Cl 2 plasma enhanced the etching of Pb component. The etched profile angle of PMN–PT increased with the increase of PR selectivity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
