Abstract
The purpose of this study was to estimate the total fatigue life for in-service asphalt mixture fatigue with in situ accelerated pavement testing (APT) and laboratory four-point bending beam tests. On a selected expressway in Shanghai, China, a series of full-scale APT tests were conducted. During the APT tests, a portable seismic property analyzer was used to monitor the pavement deterioration through modulus reduction. An equivalent factor between the APT loading and equivalent single axle loads (ESALs) was estimated. Additionally, asphalt concrete slabs were cut from the APT test sections and then transferred to the laboratory for four-point bending beam fatigue tests. A new fatigue equation was proposed for the in-service asphalt mixtures. Furthermore, a shift factor between the laboratory fatigue life and field ESAL was recommended. Finally, the field total fatigue life of the in-service asphalt mixture was estimated based on all the work in this study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.