Estimation of the Mean Effective Organ Doses for Total Body Irradiation from Rando Phantom Measurements

Abstract

For the total body irradiation (TBI) procedure, it is necessary to compare the mean dose obtained from the tissue or organs and the estimated dose equivalent value from the computer program. Due to the easy-access of the Rando phantom and repeatability of TLDs and its output, the results from the experiment are quite encouraging for the verification of the dose distributions from total body irradiation at the given prescribed monitor units. The estimation of effective dose equivalent particularly across the lung sections was studied by combinations of using arms as the scatter volume to compensate for the inhomogeneity across the breast portion, as well as using the spoiler for skin-sparing purposes. The results were based upon various beam quality such as 4 MV, 6 MV, and 10 MV X rays. One series of experiments performed for this survey to ascertain the dose equivalent of the tissues was conducted. This paper describes the method and procedure for comparison between the measured data and computed data as a reference in the dosimetry of total body irradiation. Comparison of the measured and computed data for the largest collimated field shows that the calculated dose rates do not differ by more than 2% from the measured data. Because uncertainty is inherent in non-patient-like phantoms, the calculated data may be served as a reference for the dosimetry. For the total body irradiation setup, considering the radiation field size and treatment distances commonly employed, we conclude that the best combination of the patient setup will be (1) laying both arms down as compensation for lung inhomogeneity, and (2) the spoiler, which is made of acrylic about 8 mm thick and functions like a bolus, is needed to reduce the skin sparing effects and contribute the uniform dose distribution. The beam spoiler with the frame stands near the patient during the treatment.