Abstract
One of the main distresses of hot mix asphalt (HMA) is moisture damage. The most common method for decreasing this type of distress is using antistrip additives. In this study, the effect of nanoparticles was evaluated as an antistrip agent on the moisture damage of HMA. Two types of aggregates were evaluated in this study with different sensitivities against moisture damage (limestone and granite aggregate) and the asphalt binder with 60/70 penetration grade and nano zinc oxide (ZnO) in two different percentages by weight of the asphalt binder. The tests employed to evaluate the effects of modifying asphalt binder by nanomaterials on the moisture damage of asphalt mixture were surface free energy (SFE) and AASHTO T283. The results showed that the ratio of wet/dry values of indirect tensile strength for the mixtures containing nano ZnO for two types of aggregate were higher than the control mixtures. In addition, the results of the SFE method showed that adding nano ZnO increased the total SFE of the asphalt binder, which led to better coating of the aggregate with asphalt binder. Nano ZnO decreased the acid to base ratio of SFE of asphalt binder, while it led to improving adhesion between the asphalt binder and acidic aggregate that are prone to moisture damage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
