Abstract
With the rapid development of inertial technology, the rotational inertial system has been widely used for high-accuracy navigation. In addition, the single-axis rotational inertial navigation system is one of the most popular navigation systems due to its low cost. However, the fact which cannot be ignored is that although single axis rotational inertial navigation system can restrain divergence of attitude error, it cannot eliminate velocity error, which is mainly caused by the gyro misalignment and scale factor error related to rotational axis. A novel calibration method established on filter has been proposed. Position, velocity, and attitude are chosen to be the state variables. In order to estimate the gyro errors related to rotational axis, these errors must be included in the state equation. Correspondingly, zero velocity and rate of turntable are chosen to be measured. Simulation has been carried out to verify the correctness of the theory, and the real test has been performed to further demonstrate the validity of the method. By compensating the main error estimated by filter, it can be found that the accumulated errors in velocity and attitude are decreased. So, the precision of navigation is greatly improved with the proposed method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
