Environmental Magnetic Characteristics and Heavy Metal Pollution Assessment of Sediments in the Le’an River, China

Abstract

Environmental magnetism parameters have become a useful tool in addressing environmental issues. Due to the rapid, sensitive, economical and non-destructive characteristics of environmental magnetism, the present contribution focuses on magnetism parameters as proxy for heavy metal pollution, especially from their relationship with contents of heavy metal. We evaluated heavy metals pollution and examined environmental magnetism in the Dexing section of the Le’an River. The pollution load index (PLI) of Cr, Pb, As, Cu and Zn, as well as the concentration of other heavy metals, were analyzed, and the magnetic indexes of various sediments were analyzed. The results showed that the concentrations of all heavy metals far exceeded the local background values, and that the average contamination factor of Cu was as high as 22.88, making it the element of most serious contamination. The problem of heavy metal pollution near the mine is very serious. The content of magnetic minerals in sediments of Le’an River is relatively high and the composition of magnetic minerals is relatively stable. The stable-single domin (SSD) content is high at S1 and S10, indicating that ferromagnetic mineral content is relatively rich here, which dominates the magnetic characteristics of the sample. In general, it was found that environmental magnetism indicators did not exist in the Dexing section of the Le’an River that could clearly indicate the concentration of heavy metal pollution. Only a few heavy metals can be effectively indicated by magnetic parameters. IRM-20mT and S-ratio can be used as indicators of Cr, Pb, As, Cu and Zn, but they are not accurate. The correlation between Sr and magnetic indexes IRM200mT, IRM300mT, SIRM, IRM-300mT and HIRM is significant, which can be used as an indicator of Sr concentration. IRM20mT can also be used as an indicator of Hg concentration.